寺岡 725F 0.1t
點擊圖片放大商品名稱:
規格介紹:
寺岡 725F
規格介紹:寺岡 725F
厚度0.1mm，黏性約 1.72 kgf/25mm
詳細介紹:
No. 725F is a double-sided flame retardant tape that does not use halogen-based flame
retardants. This tape is VOC compliant (non-toluene, non-xylene) .
As an “environmentally friendly double-sided tape”, this product can be used for components
in home appliances, office equipment, and automobile interiors where flame retardant
properties are required.
更多商品
Hi-Bon 11-583
ハイボン１１－５８３は、銘板用両面接着テープとして各種プラスチックへの接着性に優れたテープです｡特にＰＰ成形材料への接着性は従来の一般タイプに比べ､格段に優れた優れた テープです｡特にＰＰ成形材料への接着性は従来一般タイ比べ､格段 優れた テープです｡特にＰＰ成形材料への接着性は従来一般タイ比べ､格段接着性を発揮します。
Nitto 515 (Low VOCs)
Nitto No.515 is Low VOCs double-coated adhesive tape using by solvent-free acrylic adhesive. Excellent bonding performance to various substrates such as reinforcement of interior fitting, metal and plastic. Features ●Low (*) VOCs double-coated adhesive tape) (*) : Volatile Organic Compounds●Thick type (As tape thickness is 0.25mm) , ideal for bonding of interior fittings reinforcement.●Excellent Adhesion to substrates using by flexible non-woven fabric.●The ten hazardous materials restricted by the RoHS directive are not compounded.
Nitto 5000NSU
Nitto No.5000NS is a double-coated adhesive tape consisting of a strong, flexible non-woven fabric impregnated with acrylic adhesive that is applicable to a wide variety of substrates. No. 5000NS offers high tensile strength so it doesn’t tear when peeled and leaves minimal adhesive residue on the substrate to which it was applied even if it remains applied for a long time. The tape can be re-peeled and is ideally suited for applications that require recycling. Features ● Tape is strong so it doesn’t tear when peeled, thereby making it easier to work with.● Leaves minimal adhesive residue; can be re-peeled.● Offers wide range of usage and service temperatures as well as superior repulsion properties.● 10 restricted substances by RoHS are not contained.● No.5000NS, No.5000NSU & No.5000NSWH are UL approved products. [UL File No. MH13557][The appearance and properties of both No.5000NSU and No.5000NS are identical.]
Nitto GA808
Nitto GA808 is a double-coated adhesive tape developed for bonding components of home appliances and other electronic products.GA808 is ideal to adhere to plastic molding, insulation film, nameplates, foam, metal plating and various types of film.The tape is optimally designed to offer both superior initial bonding strength and component bonding performance. Features ●Offers superior balance of initial bonding strength and component bonding performance.●Provides superior bonding performance for all type of substrates.●Offer good adhesion even at low temperature.●Provides superior durability.●Offer high processability and workability.
3M 9080HL
Product Description 9080HL is a Double Coated Non-woven Tape with Polycoated Paper Liner. Application Techniques Bond strength is dependent upon the amount of adhesive-to-surface contact developed.Firm application pressure develops better adhesive contact & thus improves bondstrength. For splicing applications, rubbing down the tape prior to removing the liner toexpose the splicing adhesive will improve the splice performanceIdeal tape application temperature range is 21oC to 38oC. Initial tape application tosurfaces at temperatures below 10oC is not recommended because the adhesive maybecome too firm to adhere readily. However, once properly applied, low temperatureholding is generally satisfactory. Applications 9080HL tape is specially formulated for low- and high-speed splicing applications,followed if required by heat-setting or other oven-based processing conditions. The tapemakes an excellent bond to paper and board, and many plastic film substrates includingPolyethylene, Polypropylene and PVC.
3M 9448HK
9448HK is double coated pressure sensitive adhesive tape. High adhesion acrylic pressure sensitive adhesive is coated on both sides of flexible non-woven film. High adhesion acrylic pressure sensitive adhesive has goodbond strength on many types of substrate including low surface energy plastics on which most acrylic adhesive can not adhere well. Initial tack of this adhesive is not so effected by temperature change and good tack even at cold environment. Soft acrylic adhesive can penetrate rough surface and show good bonding. Paper liner is chosen to provide high suitability to converting processes such as die cutting.
3M 9888T
3M™ Double Coated Tissue Tape 9810T and 9888T feature a tissue carrier for dimensional stability and improved handling with ease of die cutting and laminating. Double-coated acrylic adhesive is suitable for various surface, and possess good performance. 3MTM Product 9810T and 9888T could control adhesive flow into open cell foam and controlled caliper for bond to application surface. For foam laminating, it provides excellent foam stability to reduce stretching and allows to more precise alignment during application. The high-density and high-strength paper liner is excellent for converting process.3M™ 9888T is UL recognized (File MH28421). Please see the UL listing for details.
